Rated 4 out of 5 stars

Hallo Otto, hier mein Verbesserungs-Vorschlag: Anstelle der beiden Radio Buttons "From" und "To" wünsche ich 2 Checkboxes! Dann kann ich jeweils beide anklicken. Habe ich ein mail beantwortet verschiebe ich sogleich die Anfrage vom Posteingang in dessen Archivmappe. Später, wenn ich die "Gesendeten Objekte" in ihre Archivmappe verschiebe, weiss QA bereits wohin! Bitte Otto, it's only a small change !

======================================================================

Hello Otto, Here is my suggestion for an improvement: Instead of the two radio buttons "From" and "To" I wish 2 Checkboxes! Then I can click both. If I answered a mail, I immediately move the request from the inbox to its archive folder. Later, when I move the "Sent Items" to archive folders, QA already knows where they go! Please Otto, it's just a small change!

This review is for a previous version of the add-on (0.2.4).  This user has a previous review of this add-on.

Rated 3 out of 5 stars

For all of the following reasons, this add-on could be better:

-- On my computer, opening the add-on's Options page causes Thunderbird to crash. If there are options on that page, I can't access them.

-- From what I am able to see of the Options page, this add-on does not appear to be very configurable.

-- The add-on works by creating rules for incoming emails, and it does that when you move an email to a folder. But the add-on doesn't allow you to create a custom rule without moving the email. This is needed because similar spam emails will often arrive from many faked email addresses, and simply moving each one doesn't create a rule that works for all of them.

-- The rules are not very flexible. You cannot, for example, have two rules applied to one email -- doing so would reduce the number of emails moved to the wrong folder.

-- Every time the add-on is used, it puts a confirmation message in the upper-right corner of Thunderbird which stays on the screen for at least 30 seconds -- very annoying!

-- The developer doesn't always respond to emails or requests.

Despite all this, I am still using the add-on, although I may not use it for long.

This review is for a previous version of the add-on (0.2.4). 

Rated 5 out of 5 stars

I really enjoy this add on. Unfortunately, it doesn't work anymore with TB 60. Any update planned? Thanks

This review is for a previous version of the add-on (0.2.2). 

Hi, there should be an update now.

Rated 4 out of 5 stars

Sehr cooles Addon, Danke schön, sehr hilfreich!

Ich wünschte mir allerdings, dass es eine Export-Funktion gibt (um z.B. die Filter zu nem anderen PC zu synchronisieren), d.h. dann auch eine Import-Funktion, sowie eine Editierfunktion.

Weiterhin ist mir ein Bug aufgefallen: Ich habe einmal einen Archiv-Ordner "x" angeklickt, war zu ungeduldig und habe bereits den nächsten Klick reingefeuert, der ging dann eine Zeile höher rein in die Liste der INBOX-Messages, allerdings war TB in dem Moment noch mit dem Verschieben beschäftigt. Sodann hat mir dann das Plugin ALLE Messages in der INBOX mit dem Folder "x" markiert, mit dem der gerade am Verschieben war. Auch nach Neustart war dem so, d.h. es blieb mir nur, das Addon zu löschen und neu zu installieren, und damit wochenlanges antrainieren zu eliminieren. Das macht das Plugin wiederum auf Dauer eher unbrauchbar, weil unwartbar. Sorry für das harte Urteil, ich hoffe es ist dafür wenigstens konstruktiv. Dennoch gibt es 4/5 Punkte für den extremen Effizienzgewinn während der restlichen 99% Zeit in der das Addon einwandfrei funktioniert.

This review is for a previous version of the add-on (0.2.2). 

Vielen Dank für die Bewertung, ja der Bug ist bekannt und leider noch nicht gefixt. Workaround: So lange die "falschen" Regeln löschen (rechtsklick->QuickArchiver Regel bearbeiten, dann "Regel entfernen") bis der Zustand wieder normal ist (muss man ggfs. 5-6 mal machen).

Rated 4 out of 5 stars

I love this add-on; saves me so much time. As one other user mentioned though it periodically glitches and ends up setting all the "send-to" folders to the same folder, which can be annoying.

The overall product is useful enough to keep even if I had to reset that every time though (which I did for a while), but you can actually do better than that. When this happens right-click the link and edit the rule and then hit delete. The links will then revert back to multiple rules. You might have to then add one or two back again but most of your original ones will still work.

With that tweak as well the bug becomes much less annoying, and even that only happens now and then. As such, the end result is well worth keeping and quite useful for me.

This review is for a previous version of the add-on (0.2.2). 

Rated 2 out of 5 stars

Installed this a couple weeks ago. It was working wonderfully until I looked up at one point and every single email message had a link to the same folder, regardless of where I'd dragged it before. I tried dragging the messages to their "old" folders, but the links didn't change. Only way to fix it was to reset and start all over again. Happened to me twice. Too bad - I liked this, but it's not working for me. Would give it one star, but it WAS really great when it was working. Thank you.

This review is for a previous version of the add-on (0.2.2). 

Rated 4 out of 5 stars

I use the tool a lot - very helpfull.
One important feature I am missing:
The rules are always based in the inbox. Rules for mails I sent (I have an bcc for all mails int the inbox so I am sure it was really sent out) always use the sender (which is me) as base for the rule. As a result:
Whenever I archieve a mail I sent the rule is proposed to all other mails I sent. So each time I send a mail to a new person I manually have to change the rule.
Proposal: if the sender is myself, use to "to/an:" field as basis for the rule.

This review is for a previous version of the add-on (0.2.2). 

Rated 4 out of 5 stars

Hi,
is it possible to exclude an email-address from the rules? I have [email protected] mails and they are stored in different directories.

Best Regards

This review is for a previous version of the add-on (0.2.2). 

Rated 4 out of 5 stars

I only installed it about 8 hours ago but so far it seems to be working fine. I just wish there was a toolbar button that could be used as an alternative to links in a column.

Update: After using it for a little while now I still like it but found that it does not distinguish between separate accounts. This is a big flaw for me because it will move emails from one account to another which is not what I want. This would not matter to those only using a single account but I have many accounts.

This review is for a previous version of the add-on (0.2.2). 

Hi, thanks! Toolbar button is now on the todo list!

Rated 4 out of 5 stars

Looks like that sometime creating a new filter it write it with empty rules. That means that is mathed on all email... the only solution is reset all settings.
Could I provide any log to solve this problem? I would be glad to help

This review is for a previous version of the add-on (0.2.2). 

Hi, yes thats unfortunately right. Its maybe timing related, if the server is somehow slow while moving then an empty rule gets created. You dont have to reset all rules, just delete the single rules until the problem disappears. Sometimes there are multiple empty rules (related how much you clicked while the server was slow).

Will try to get this fixed soon!

BR
Otto

Rated 3 out of 5 stars

Works fine until you decide to change destination folder for one sender.
I have a folder called "Job", is this folder I have One subfolder per year, (2010,2011,2012).
Last year link to "2011(Jobs) was displayed for mails from "job". This year it still display "2011 (Job)" link even if I already put several emails in 2012 folder manually.

It would be nice to be able to edit destination link for each sender/subject 'cause other links are correct and I don't want to reset all links. (Adding a special filter action ?)

This review is for a previous version of the add-on (0.2.1). 

Rated 4 out of 5 stars

Very useful extension, but something went wrong with the last version and TB 9.01. I lost most of the remembered folders and it does not remember new ones. I reset the database just in case, but it didn't fix the problem.

This review is for a previous version of the add-on (0.2.1). 

Hi, please contact me via [email protected] .

Rated 3 out of 5 stars

The English translation is not the one displayed on the French version of AMO: the German one shows up actually :)

This review is for a previous version of the add-on (0.2.1). 

Ah i see, but i think i cannot change this in the admin section. By the way: if i send you the strings of quickarchiver, could you translate them to french? ;)

Rated 5 out of 5 stars

Very useful!

Proposal (as mentioned by others): Would be great to order outgoing emails by destination instead of sender.

This review is for a previous version of the add-on (0.0.1). 

Rated 5 out of 5 stars

Exactly what I needed. Works nice!!! I love this.
You see a new column next to the email name and by clicking it the email gets archived in the same folder where you archived the previous email with the same origin address.

To the developer:
1)Keys not working for me. But I love to click on the link as this tells me where the email will be archived.
2)The sent mail is not discriminated by the destination address. So no matter to whom I sent the email, the system suggests only one folder for all the emails in the sent folder. Could you fix this?

RECCOMENDED!!!! VERY HAPPY HERE.

This review is for a previous version of the add-on (0.0.1). 

Rated 3 out of 5 stars

El plugin es bueno, a mí me funcion bien en la versión de thunderbird 3.1.14. Me viene muy bien para archivar los mensajes de remitentes habituales porque tengo un arbol de directorios enorme y era un coñazo tener que ir arrastrando emails a las carpetas.

This is a good complement, for me it works fine on thunderbird 3.1.14. It´s very useful when you want to archive easily emails coming from regular customers / providers if you have a lot of folders and subfolders

MEJORAS: El plugin no me resuelve el archivo de los emails que yo envío. Me explico. Cada vez que mando un email me pongo a mí mismo en copia oculta para que me llegue una copia del email que he enviado a la bandeja de entrada. Estaría genial si se pudiera especificar par los emails propios que el complemento mirase en lugar del email del remitente el email del destinatario.

IMPROVEMENTS: For all the emails I send to clients and customers, I use to put my own email in BBC so I receive a copy of the email sent in the inbox. It would be very nice If (for the emails accounts I have) I could specify to archive this emails by adresee and not by sender

This review is for a previous version of the add-on (0.0.1).