Bewertet mit 5 von 5 Sternen

Love the add-on, but it is not compatible with TB 91.0 as of now.

Bewertet mit 5 von 5 Sternen

I really like your extensions, but it's not compatible with version 78.9

Bewertet mit 5 von 5 Sternen

I haven't yet used the add-on, but I would LOVE to see a column for use in All Mail that would show what FOLDER the mail resides in!

Bewertet mit 5 von 5 Sternen

Version 7 is now available which works with Thunderbird 68.x. Thanks for the update!

Dieser Benutzer hat eine ältere Bewertung zu diesem Add-on.

Bewertet mit 5 von 5 Sternen

Superb add-on that lets you control your default columns for new folders, reset folders to your chosen viewing configuration, brings back the much needed Cc column to the Inbox and Sent windows (if you want them), and even lets you add a Bcc column. Love the ease of use and the control it finally gives me over my TB workspace. Can't recommend highly enough.

Dieser Benutzer hat 2 ältere Bewertungen zu diesem Add-on.

Bewertet mit 5 von 5 Sternen

I really expect for version 68
How soon will it be?

Diese Bewertung wurde für eine vorherige Version des Add-ons (6.1.2) abgegeben. 

S
It's out!

Thanks for the nice review!
I cannot promise , but I am hoping in the Couple of weeks time frame. That is assuming I do not run into any major roadblocks.
I am now going full bore on this as well as positioning for 78 !
Track status in #90
Also , I have b2 minimally working
https://github.com/micz/ColumnsWizard/tree/v7.0.0/xpi
Grab the latest 7.0.0-bx

Christopher

Bewertet mit 5 von 5 Sternen

Until this is updated to work with 68+, is there a (manual) work-around to set the new column defaults?

Super useful addon, and I liked it very much!!!

Diese Bewertung wurde für eine vorherige Version des Add-ons (6.1.2) abgegeben. 

David
It's out, enjoy!

working on right now!
I will be looking for beta testers
cheers
Christopher

Bewertet mit 1 von 5 Sternen

funktioniert leider nicht mit Version 68.4.2
bitte, bitte macht ein Update

Diese Bewertung wurde für eine vorherige Version des Add-ons (6.1.2) abgegeben. 

S
It's officially released!

Bewertet mit 1 von 5 Sternen

Does not work with 68.1.2. Please update and then I will change my rating

Diese Bewertung wurde für eine vorherige Version des Add-ons (6.1.2) abgegeben. 

It's officially released!
Review updates always appreciated.

I am finishing up with another upgrade for Mic
after that I will be updating ColumnsWizard
Thanks for the patience!

Bewertet mit 5 von 5 Sternen

Edit: I found what was causing the problem: the mail header field *must be in lowercase* in the extension options, even if it is in mixed case in the message header.

Fields created with the extension are not populated when importing mbox files using the ImportExportTools addon.
Column is active in the folder that will receive the messages, with the "Apply columns to / Folder and its children" option enabled.

Diese Bewertung wurde für eine vorherige Version des Add-ons (6.1.2) abgegeben. 

Bewertet mit 1 von 5 Sternen

Added columns that used X-Spam-Bar or X-Spam-Score headers but the column shows no values for any of the emails. Using Thunderbird version 60.6.1.

Diese Bewertung wurde für eine vorherige Version des Add-ons (6.1.2) abgegeben. 

Jim
I have the current 6.1.2 ColumnsWizard running under Windows10 Thunderbird 60.6.1 32bit
the xspam score is one of the columns I always have and currently do not see an issue.
Can you post more details on the support site so I can troubleshoot it, thanks.
Christopher

Bewertet mit 4 von 5 Sternen

you just need to add the css for the options (setings.xul) to make them working again. See the 57 addon document, somewhat hidden, I oversaw it for my addons as well:

add "<?xml-stylesheet type="text/css" href="chrome://messenger/skin/preferences/preferences.css"?>
" without the "

Diese Bewertung wurde für eine vorherige Version des Add-ons (6.1) abgegeben. 

Bewertet mit 1 von 5 Sternen

As the development of the extension is suspended I provide the warning for its prospective users here.
The way the settings window of this extension works in Thunderbird 60.* is completely buggy. If someone uses the extension options button to open it then the displayed window cannot be closed: escape key doesn't work, there's no "close" button.
The window is centered on the screen and not movable. When another application window is activated then clicking the main Thunderbird window doesn't reactivate it - it's necessary to click ColumnsWizzard's options window first, then Thunderbird window. Fortunately, it's possible to close Thunderbird because while option windows can't be moved the main window can...

Diese Bewertung wurde für eine vorherige Version des Add-ons (6.1) abgegeben. 

Bewertet mit 3 von 5 Sternen

Hi, I have created a special column called "X-PO". I can edit it, and the new header is writtten into the mails header. Also I can search the text, but the text is not shown in the X-PO-column of the mail list. Can you please help?

I'm using Thunderbird 38.7.2

Edit: Just tested again with 52.9.0, but still the same.

Diese Bewertung wurde für eine vorherige Version des Add-ons (6.1) abgegeben. 

Bewertet mit 5 von 5 Sternen

I wanted to expose the url of RSS messages. A column with the Header 'content-base' did the trick.

Diese Bewertung wurde für eine vorherige Version des Add-ons (6.0.4) abgegeben. 

Bewertet mit 5 von 5 Sternen

I wanted to see 'X-Delivered-to' information in a column.
I clicked > Options > Custom Column Editor > General
Added the following ...

ID: test
Mail Header: X-Delivered-to
Column Name: Delivered To
Tooltip: Sort By Delivered To

Works fine, could not find any examples on the dev's website, so hope the above helps someone

Diese Bewertung wurde für eine vorherige Version des Add-ons (6.0.4) abgegeben. 

Bewertet mit 4 von 5 Sternen

I was looking for a way to make Thunderbird actually show the e-mail address of who sent a message when viewing a message list. Thunderbird only does this if a) there's no entry for the address in your address book and b) if the address doesn't have a "personal name" associated with it. Since most e-mails are now sent out in the "Name" <email-addres> format, the "From" column in message list view is pretty useless. And it makes it great for phishing attacks.

This add-on comes with some custom columns already configured: BCC, CC, Content-Base, X-Spam-Score, and X-Original-From. But! They will not be visible nor accessible from message list view until you actually enable them in ColumnsWizard.

(You do that by clicking the ColumnsWizard toolbar button, then click the Custom Columns tab and check off the columns you want to enable).

Once enabled, whatever custom columns you've set-up become *available* for message list view. Like any of the stock columns, you can enable or disable them, sort by them, size them and position them.

Adding a custom column is pretty simple. You just specify an ID (a unique string of your own choosing), the actual mail header for the column (Such as replyTo, Sender, etc) and the display name and tooltip for the column. Then you just enable it.

I setup one for "Sender" and it works great. The previous one-star review saying it doesn't probably didn't look at the docs or go through the config.

Minor issues:
1) It looks like custom columns, unlike stock columns, will not remember their size between Thunderbird sessions. Positioning does stay though.
2) A custom column can only map to one mail header. Which is generally fine, but some mail clients and servers provide useful information under more than one header (Both "Sender:" and "X-Sender:" are used for the original sender address, for example). If there was a way to map multiple headers to a column and give them a priority, that'd be useful. But that's not a deal-breaker for me.

Other nice feartures of this addon include being able to specify the default columns layout for message view for any new folders you create, some extra columns for Conversation view, the ability to enable mail header editing, and the ability to reset columns to the ColumnsWizard default you've setup.

Overall, very nice add-on that does what I want and more. Cheers to the author!

Diese Bewertung wurde für eine vorherige Version des Add-ons (6.0.4) abgegeben. 

Bewertet mit 1 von 5 Sternen

No such menu in interface such as ad promised.

Diese Bewertung wurde für eine vorherige Version des Add-ons (6.0.4) abgegeben. 

Bewertet mit 3 von 5 Sternen

Hello,

I installed on all my machines extension and setup the same headers / columns that i would like to use. But they are only visible on the machine that is editing them. I did a repair folder to see if it will pull or show them
in the columns view. However custom headers are visible in the message on all devices but they are not showing on the columns.

Did I do wrong configuration?

Rating 3 because of this! Only usuable on one instance/device. If more used you need to look in the headers manually.

Thanks.

Diese Bewertung wurde für eine vorherige Version des Add-ons (6.0.4) abgegeben. 

Folder repairing is not working on every Thunderbird version.
Are you using an IMAP account? Have you tried to force an update of the folder using the "send and receive" command? Sadly it's not possibile to have control on how Thunderbird manages an already downloaded message with a change in an header. Have you checked the "Force changes when using IMAP accounts" option?

Please, file an issue at https://github.com/micz/ColumnsWizard/issues/ describing your problem, the Thunderbird version used and your Operating System, so I can help you further.
Thank you.

Bewertet mit 4 von 5 Sternen

I cant get those x-spam-score or x-original-form custom colums to work. Any chache for video tutorial? I need one colum with original sender IP adress.

Diese Bewertung wurde für eine vorherige Version des Add-ons (6.0.3) abgegeben. 

Please, contact me at [email protected] so I can ask you more details about your needs.
Thanks.